fbpx
SafetySPRAY – APS Procurement Ltd
Featured

SafetySPRAY – APS Procurement Ltd

0 Reviews Sold: 0
Vendor: Adesola Agboola

APS Procurement Ltd launches automated mist sanitizing safety walk-thru-booth, The SafetySPRAY.

Used in conjunction with other sanitizing and good hygiene strategies, SafetySPRAY offers a frontline defense against COVID-19 by ensuring that staff, customers, commuters, shoppers, travelers etc. are properly sanitized at mass entry and exit points to office buildings, factories, malls, train/bus stations, airports, banks, schools, churches, mosques etc.

Report Abuse

The booth is equipped with an infrared sensor and activates when an individual approaches but can also be set to manual dosing and run on preset timing intervals. Set in a V-shape trajectory above the shoulders, the sanitizing mist engulfs the individual’s entire body drying soon after exit. The SafetySPRAY has been tested and found to be safe for human use.

 

 

 

 

Booth Specification

The SafetySPRAY booth is designed with a maximum flow rate through each nozzle of 4.2 liters per hour across 6 nozzles for a total volume output of 25.2 liters per hour or 7 ml of sanitizer per second. Our testing establishes that a slow walk through the 2m booth will take 3 – 5 seconds, resulting in a maximum exposure of 35 ml of sanitizer per person, a portion of which will be distributed evenly over the individual’s entire body. Standard breathing patterns suggest 20 breaths per minute or a breath every 3 seconds. The atomization process ensures that exceptionally low volumes of liquid are dispersed evenly and penetrate hard to reach places, making it extremely effective and efficient. The SafetySPRAY Booth uses this atomization process in an automated manner, creating exceptionally fine atomized mist without any human involvement. This process allows for the “funneled” sanitization of large volumes of people by an automated and controlled system.

Other Features:

  • SS 304 square tube frame with opaque Polycarp sheet covers on side and roof.
  • Plug and play unit ready to be supplied with sanitizer direct in to pump unit
  • SS instrument HP mist manifold with 6 off 0.2 mm sanitizing mist nozzles
  • Working pressure: 70~65 kgf/cm2 | suction volume: 0.9~1 L/min
  • 1000 psi operating pressure for optimal misting effect using the narrowest orifice nozzles
  • Nickel-plated forged brass manifold resists rust and corrosion
  • Special Viton seals for use with sanitizers
  • Patented internal rinse cooling design to increase pump life
  • Dual bearing design to lower the heat and noise level down to 75 dB
  • Automatic pressure valve controls the consistency of the pump
  • Dual assembly with settings for minutes and seconds to set the misting intervals
  • Dual analog timer has settings for minutes and seconds to set exact intervals for misting and stopping. (The shortest spray time setting: 5 seconds; the shortest stop time setting: 15 seconds)
  • Beam activated entry and auto stop.
  • Dimensions:
  • 2000 m nozzle height
  • 2300 mm roof pitch
  • 970 mm wide
  • 2000mm long.

A One Bundle Package

  • Consists of SafetySPRAY Sanitizer Booth,
  • Installation and after sales service
  • 100 liters of sanitizer solution

Product Warranty

12 months material and labor

Order Procedure

Due to the huge demand for SafetySPRAY our OEM partner is so inundated and working flat out to meet up orders, as such all orders must be made with a minimum of 70% deposit with delivery timeline of 12 – 15 working days.

Call to order

+234-7035966935

+234-7087161621

Contact:

sales@allianzllc.com

admin@allianzllc.com

Reviews

There are no reviews yet.

Be the first to review “SafetySPRAY – APS Procurement Ltd”

Business Information

  • Address:
  • No ratings found yet!

Product Enquiry

Please Login to make enquiry about this product